The Powered Transfer Chair is one of the most unique products and one of the only products located in Australia. As Disability Equipment Providers, we are able to offer the most unique and innovative products that never existed before.

Suitable for indoor and outdoor use, including;

• The kitchen
• The living room
• The bathroom (for toileting)
• Your bedroom
• In a hallway

The Powered Transfer Chair with electrical height adjustment has automatic adjusting features.

Features;

• Light Weight Portable Patient Transfer
  ✅ Heavy Duty: 150kg
  ✅ NDIS approved , Aged Care approved
  ✅ Over Toilet Aid Transfer Chair
  ✅ Electric Height Adjustable
  
  
• Automatic Height Adjustability - Making it easy to transfer to lower places such as your couch or under the table or higher places such as your bed or over a high shower rim.
• Non-slip feet and Safety brakes - These added safety features make sure that your Powered Transfer Chair is in place and locked in when the person is seated.
• Swing away split backrest - To easily transfer people from their bed by holding onto the grab rail and shuffling forward. Then the backrest is re-attached and the person is seated.

Specifications:

• Nominal voltage rated power 100W/2A – Drive mode storage battery
• Battery Capacity (Amp Hour): 4Ah
• Battery Capacity (Watt Hour): 88.8Wh
• Lift range: 250mm
• Load weight: 150kg
• Overall dimensions: 950*600*350mm
• N/W: 15kg
• Internal depth: 48cm
• Internal width: 46cm
• Seat width: 45cm
• Seat depth: 35cm
• Maximum height: 67cm from the ground
• Minimum height: 42cm from the ground
• Insert the backrest into the pedestal spindle and power on the machine; then, you can adjust the height with the Up and Down buttons.
• Press the Up and Down buttons to adjust the seat to the appropriate height and release it to stop. It will stop automatically when the machine reaches the highest or the lowest points, even if the button is not released.
• For safety, this product is designed with low—a voltage power supply.

Conformity Assessment

Declaration of Conformity

Annex 11 & 111 of Regulation (EU) 2017/745

Applicable Standards

• EN ISO 14971:2012
• EN ISO 15223-1:2016
• EN ISO 20417:2021
• EN ISO 10993-1:2020
• EN ISO 10993-5:2009
• EN ISO 10993-10:2023
• EN 60601-1-2:2015+A1:2020
• EN 60601-1-2:2006+A1:2013
• EN 12182:2012

Maintenance

After using this product for some time, check whether the screws of each part are loose. If there is any loosening, tighten it in time.

This product uses AC low-voltage power supply. If there is water on the machine’s surface, dry it with a towel.

Do not rinse with water directly. Power: 100 W.

Please note: that this item is an electrical product, so please keep the electrical part dry.